HUAYUWA 人工ジョイスティック ダストカバー Thrustmaster Hotas Warthog A-10C Flightstick 保護ケース

This article takes a closer look at the HUAYUWA dust cover for the Thrustmaster HOTAS Warthog A-10C, with enough detail to decide whether it is worth buying.

Overview

This is a purpose-shaped dust cover for the Thrustmaster HOTAS Warthog A-10C throttle and joystick. The short verdict: it is for people who keep their HOTAS permanently on the desk and never put it away.

The Warthog is a heavy metal-based unit that most owners never box up between sessions, so a leave-it-out dust strategy makes sense.

The published specs are short: waterproof flannel material, black, and three variants (throttle/left, joystick/right, or both). No dimensions, weight, or stitching details are listed.

Treat it as a fabric cover and nothing more — it is not light-blocking, moisture-proof, or impact-protective.

On Amazon.co.jp the listing showed 15 reviews at 4.3 out of 5 stars (roughly 86% positive) as of the June 3, 2026 capture.

With only 15 reviews, that score means little more than "no widespread complaints." Read the caveats section before deciding.

Compatibility Guide

The manufacturer states it is designed exclusively for the Thrustmaster HOTAS Warthog A-10C throttle and joystick, and is not compatible with other flight sticks. That is a narrower fit than most flight-sim accessories.

Three practical checks before buying. First, grip swaps: if you run a third-party grip or an extension on the Warthog stick, the height changes and the cover may not reach or may sag badly.

Assume a stock configuration.

Second, mounting: if the Warthog is clamped to a desk mount or bolted into a sim pit, brackets protrude around the base. A fabric cover does not wrap the underside, so hardware can get in the way.

Expect it to drape over the upper half of the unit rather than enclose it.

Third, cables: you can drop the cover over a unit with cables attached, but the hem will ride up on the cable and leave a gap. Convenient, not sealed.

Product Info

Pricing was ¥5,288 on Amazon.co.jp as captured on June 3, 2026, and $13.47 on a marketplace listing captured on July 15, 2026.

Even allowing for exchange rates, that gap is wide enough that neither figure alone should be read as "the market price." All prices are as-captured and shift with sales, stock, and which variant you pick.

Note also that one channel is labeled as a US store while the link points to Amazon.co.jp in yen — confirm which storefront you are actually on before ordering.

A word on value: around ¥5,000 for a fabric cover is expensive next to generic equipment covers. It holds up only because almost nothing else is cut to the Warthog's shape.

If an exact fit does not matter to you, a generic appliance dust cover gets you most of the same dust protection for far less. You are paying for the shape.

Only the cover is included — no manual. Warranty depends on the seller and usually amounts to the return window.

How Much It Actually Helps

A dust cover slows accumulation; it does not eliminate it. On a Warthog the real problem is not the exterior finish but dust working into switch and hat gaps and into the throttle rails.

Dust mixed with skin oil on the rails is what makes movement feel gritty or noisy over time. A cover reduces the rate of ingress, nothing more.

Realistically, pair it with occasional maintenance: blow out the switch areas with compressed air every few months and wipe skin oil off the grip with a dry cloth. Covering the unit does not replace cleaning it.

Flannel also picks up static easily. In dry weather, yanking the cover on and off can attract dust and turn the cover itself into the source.

Shake or clean the cover periodically. Check the listing for washing instructions — water-repellent finishes often degrade in the wash.

Alternatives Worth Considering

There are three approaches: a shape-specific fabric cover like this one, a generic appliance cover or large cloth, or actually storing the gear after each session.

The advantage of a fitted cover is that putting it on takes a second. Low friction is what makes the habit stick, and a dust routine only works if you keep doing it.

Generic covers are cheap but tend to bunch up and snag on switches, which is exactly how they end up unused. Storing the unit is the most effective option, but the Warthog is heavy enough that most owners will not do it daily.

The bigger-picture alternative is changing the setup itself: a desk mount or sim stand that lets you push the HOTAS aside when idle often does more for both dust and ergonomics than any cover. Think about the whole desk, not just the cloth.

Best Use Cases

Straightforward recommendation if you are:

• A Warthog owner who leaves the setup on the desk permanently
• In a dusty environment — pets, open windows, carpeted rooms
• An irregular flyer who does not want to start each session with cleaning
• Streaming or photographing your desk and want it tidy
• Protecting resale value on expensive hardware

The irregular-flyer case is the strongest fit. If you fly daily, you touch the gear before dust settles anyway, so the benefit shrinks.

Things to Know Before Buying

It is cloth. "Waterproof flannel" suggests spill protection it does not really provide.

Assume light repellency at the surface and keep drinks away from the desk as usual. There is no impact protection either.

Picking the wrong variant is the most common mistake. Three options exist — throttle only, joystick only, or both.

Buying what looked like the cheaper option and receiving one side is a frequent complaint pattern for products sold this way. Verify the selected variant at checkout.

No dimensions are published. Without measurements you cannot verify fit on a modified stick with a swapped grip or extension.

If your rig is modified, buy from a seller with a clear return policy or just use a generic cover.

The review sample is small. 4.3 out of 5 from 15 reviews as of June 2026 is fine, but that count cannot tell you anything reliable about unit-to-unit stitching quality.

Check the return terms first.

Price data disagrees across channels. The figures referenced here — ¥5,288 (captured June 3, 2026) and $13.47 (captured July 15, 2026) — are hard to reconcile, and one channel label does not match the storefront it links to.

Listing metadata on marketplaces is sometimes wrong or stale, so confirm price, seller, and compatibility against the product images and title before ordering.

Watch the category label. This is an accessory for the Warthog, not a flight stick.

Listings sometimes file it under flight sticks; no stick is included.

Finally, it is optional. If you fly several times a week, live in a low-dust room, or already throw a cloth over the desk, roughly ¥5,000 is hard to justify.

The same money spent on a desk mount or rudder pedals changes how the gear feels to use, which most people will notice more.

FAQ

Q. Will it fit flight sticks other than the Warthog? A.

No. The manufacturer lists it as Warthog A-10C only.

T.16000M, X56, and similar units have different shapes.

Q. Can I leave cables plugged in?
A. Yes, you can drape it over a cabled unit, but the hem will lift and leave gaps. It is not a seal.

Q. Does it cover both throttle and stick?
A. Only if you order the two-piece set. Single-side variants exist, so check your selection.

Q. Is it washable? A.

Check the listing. Water-repellent fabrics often lose that finish in the wash, so shaking or wiping is the safer first option.

Q. Can I stop cleaning the hardware?
A. No. It slows dust ingress; switch gaps and throttle rails still need periodic attention.

Q. What does it cost? A.

¥5,288 on Amazon.co.jp as of the June 3, 2026 capture.

Varies by variant and sales — check the current listing.

Product Disclosure (Amazon)

• Manufacturer: HUAYUWA
• Seller: SHAOEHS JP
• Fulfilled by: SHAOEHS JP
• ASIN: B0BGP2JJ9N
• Note: This article covers a manufacturer-made product based on Amazon listing details.