ユニバーサル Hotas デスクマウント Thrustmaster Warthog 10C&Throttle

Overview

This is a universal clamp mount for attaching a flight-sim HOTAS (Hands On Throttle And Stick) to the edge of a desk. The short version: it suits people who own or plan to own multiple HOTAS devices, and people who cannot drill into their desk.

It is overkill if you only need to keep one lightweight stick from sliding. Note that no stick or throttle is included — this is hardware for mounting, nothing else.

Rated specs are a 386 kg clamping force, support for desk tops from 0.2 to 5.3 inches thick (roughly 5–135 mm), a unit weight of 3.54 kg, and a 28.3 × 18.3 × 5.7 cm package.

On Amazon.co.jp, as captured on 28 May 2026, it holds 4.3 out of 5 stars across 85 reviews (86% positive) — a solid score, though on a modest sample.

Left- and right-hand placement are both supported, so a conventional stick-right / throttle-left layout works as-is.

One housekeeping note: this article is auto-categorised under "flight stick," but the product is a mount, not a stick. Everything below evaluates it as a mount.

Compatibility Guide

The claimed compatibility list is below. Check it against your own gear before buying.

The pattern is clear: it targets the mainstream Thrustmaster and Logitech line-ups and reaches up into mid- and high-end VKB and VIRPIL gear. Anything not on that list — newer boutique brands, or large throttles with proprietary bases — needs verifying yourself.

Most HOTAS units have generic mounting holes underneath, but if the hole spacing and count don't match, it simply won't bolt down.

The condition that trips people up most is the desk, not the device. The 0.2–5.3 inch thickness range is generous, but what matters more than thickness is clear space at the edge for the clamp jaws.

Desks with a reinforcing rail under the top, a drawer immediately behind the edge, or a rounded/chamfered edge profile may not accept the clamp, or may not seat flush when tightened. Before ordering, measure your intended position: you want roughly 5–8 cm of flat, unobstructed surface inward from the edge, top and bottom.

Also keep the 386 kg figure in perspective. It describes clamping force, not what your desk can survive — the weak link is always the desk. Clamping hard onto a particleboard top can dent the surface or delaminate the veneer.

A 3–5 mm rubber sheet or a scrap of wood used as a pad spreads the load and prevents marks.

Product Info

Pricing was ￥61,280 on Amazon.co.jp as captured on 28 May 2026, and $529.99 on eBay as captured on 9 July 2026.

Both move with sales, exchange rates and seller turnover, so check the listing for the current figure.

Being straight about it: that is expensive for a mount on its own. Comparable quick-release desk mounts exist at considerably lower prices.

Plausible explanations include (a) the listing being some kind of set, as the "Warthog 10C & Throttle" wording in the title hints, (b) import and forwarding margin, or (c) an inconsistency in the listing data itself. Whether the price is justified depends entirely on what the "contents" section and product photos show — one mount versus a pair changes the value proposition completely.

Confirm that before ordering.

On specs, the model number is listed only as the generic "Hotas mount," with no manufacturer part number published. At 3.54 kg the unit is heavy for a mount, which points to thick metal arms and a substantial clamp mechanism — a shipping disadvantage, but a rigidity advantage in use.

The compact 28.3 × 18.3 × 5.7 cm package reflects that it arrives largely assembled; fitting it means tightening a clamp.

The push-pull clamp allows tool-free attachment and removal. Warranty terms vary by seller, so read the listing.

How It Compares

There are three realistic alternatives in this space.

• Clamp-on desk mount (this product) — no drilling, removable when not in use. Ideal for rented or shared desks. Stability depends on the quality of your desk top.
• Stand or frame rigs (floor- or chair-mounted) — free of desk constraints, closer to real cockpit geometry, but they occupy floor space permanently and cost more.
• Placing the gear directly on the desk with grip pads — free, but even a heavy Warthog throttle will creep under hard pulls.

This mount earns its place in the first scenario: you can't modify the desk, but bare placement isn't holding. If you already run a dedicated cockpit frame, its role is redundant.

What Actually Changes in Use

The biggest practical gain is input repeatability. Loose on a desk, a stick shifts a few millimetres with every pull, and you subconsciously correct your hand position.

Fixed to a mount, the origin of every input is identical — which shows up in dogfighting, in continuous fine corrections, and in delicate trim work in DCS or MSFS.

The second gain is height and angle freedom. Dropping the stick slightly below desk level, beside your thigh, puts your wrist at a natural angle when your elbow rests on the desk, and noticeably reduces fatigue on long flights.

The closer you want to get to a real side-stick position, the more that adjustment range is worth.

Don't expect quieter operation, though. Metal arms transmit vibration, so the detents on a Warthog throttle can send an audible click through the whole desk.

Rubber padding at the clamp helps if that bothers you.

Best Use Cases

• Owners of multiple HOTAS devices, or anyone likely to upgrade — the broad compatibility list means moving from VKB to VIRPIL doesn't mean buying another mount.
• Renters and shared-desk users — clamping requires no drilling or permanent modification.
• People whose desk has a day job too — tool-free removal returns the surface to flat, which matters if you also work there.
• Heavy-handed simmers on Warthog-class gear — 386 kg of clamping force and 3.54 kg of mass give you headroom for aggressive inputs.
• Anyone with wrist or shoulder fatigue — being able to set height and angle to your body reduces posture-driven strain.

Things to Check Before Buying

First and most important: this is a mount. No stick and no throttle are included. "Thrustmaster Warthog" in the title indicates compatibility, not contents.

Misreading that is the single most common complaint on products of this type.

Verify the price and the listing data yourself. As noted, ￥61,280 (captured 28 May 2026) is clearly above the going rate for a mount alone, and the $529.99 eBay figure is similarly high.

Amazon listing fields — manufacturer, part number, set contents — are populated automatically and sometimes disagree with what actually ships. Cross-check the product photos, the title and the contents description so you know exactly how many pieces you're getting. If the value doesn't add up, comparable mounts at lower prices are worth a look.

Your desk sets the ceiling on performance. On a thin particleboard top, the desk fails before the clamp does.

Wobble frequently traces back to the desk, not the mount. Press down on the corners of your desk: if it flexes, replacing the desk will improve things more than any mount will.

Anything outside the compatibility list is on you. Boutique brands and throttles with unusual base geometry may not line up.

Photograph the underside of your device, measure the hole count and spacing, and compare against the listing images.

Mounting position is constrained by your chair. The mount only attaches at the desk edge, so armrests that won't slide under the desk can prevent you from placing the stick where you want it.

Measure armrest height and under-desk clearance in advance.

The review sample is 85 as of 28 May 2026. A 4.3 average is good, but it's not a large base — individual unit variation and packaging differences between sellers may not be fully reflected yet.

FAQ

Q. Does it include a stick or throttle? A.

Generally no. Model names in the title indicate compatibility.

Always confirm the listed contents on the product page.

Q. Will it fit any desk? A.

It covers tops from 0.2 to 5.3 inches (about 5–135 mm).

But even within range, under-desk rails, drawers or chamfered edges can block the clamp. You need a few centimetres of flat surface inward from the edge.

Q. Will it mark my desk? A.

Tightened hard, it can leave impressions, especially on veneered tops. A rubber pad under the jaws spreads the pressure.

Q. Is it usable left-handed? A.

Yes — both left- and right-side placement are supported, including swapped stick and throttle positions.

Q. Can I take it off when I'm not flying? A.

Yes, the push-pull clamp is tool-free. At 3.54 kg, though, plan where you'll store it if you remove it often.

Q. What does 386 kg of clamping force actually mean? A.

It's a measure of clamping pressure, not of what your desk can bear. Real-world stability is governed by the strength of your desk top.