Pulsar Gaming Gears' Supergrip is a pre-cut mouse grip tape shaped specifically for the Xlite Series Mini. At 0.5mm thick, it adds friction without meaningfully changing the shell's dimensions.

As captured on 26 May 2026, the Amazon.co.jp listing showed ¥980 (tax included), with a 4.3-out-of-5 rating across 64 reviews (86% positive).

Overview

The short version: this is worth buying only if you already own a Pulsar Xlite Series Mini and notice your fingers slipping during long sessions. Unlike generic grip sheets, the pieces are die-cut to the Mini's contours, so there is no trimming step — and no way to adapt it to another mouse.

0.5mm is thin even by grip tape standards.

It will not bulk out the grip the way thick silicone wraps do. The goal is purely to raise surface friction while leaving weight balance, sensor position, and click feel untouched.

Think of it as tuning for people who like the lightweight mouse exactly as it is.

A 4.3 average from 64 reviews is genuinely solid for an accessory, but 64 is a small enough sample that a handful of outliers move the mean.

If you can see the star breakdown, check whether the low ratings are about adhesion or about buyers ordering the wrong model.

Compatibility Guide

The only officially supported mouse is the Pulsar Xlite Series Mini. The cut outlines follow that specific shell, so other brands — and other Pulsar sizes — will not line up.

Item Value What it means in practice
Thickness 0.5mm Grip diameter barely changes; not a bulking solution
Compatible mouse Pulsar Xlite Series Mini No cross-model reuse
Cut type Pre-cut No trimming needed; no shape freedom either
Form factor Mouse No effect on cable or charging

The most common mix-up is size and generation within the Xlite line. Xlite ships in sizes other than Mini and has gone through revisions.

Check the model text on the underside of your mouse before ordering. If the box is gone, the bottom label or the manufacturer's product page is the reliable source.

If you can't confirm it, a generic uncut sheet you trim yourself is the safer purchase.

Installation needs no tools — peel and stick. Prep matters more than people expect.

Tape applied over finger oils never reaches full initial tack and starts lifting at the edges within days. Wipe the surface with anhydrous alcohol or an eyeglass degreasing wipe and let it dry fully.

In cold rooms the adhesive is stiff and grabs poorly; let the mouse reach room temperature and press each piece firmly for a few tens of seconds after application.

The adhesive is described as leaving minimal residue, which is not the same as none. Long-term application, direct sunlight, or heat all make residue more likely.

Factor that in if you plan to resell the mouse later.

Product Info

As captured on 26 May 2026, the Amazon.co.jp price was ¥980 including tax.

Prices move with sales and point promotions, so check the listing for the current figure. It is sold as a domestic authorised product, shipped and sold by Amazon.co.jp.

The package contains the grip tape sheets only — no alignment guide, no alcohol wipe. You supply the prep materials described above.

As a consumable, no warranty period is stated. Tape of this type generally wears smooth over a period of months depending on use and hand condition, so budget for replacements: the meaningful number is unit price times replacements per year, not unit price alone.

The secondary marketplace entry (eBay) is a search link with no confirmed price. Buying within Japan, the domestic authorised listing carries less risk of getting the wrong item.

Product Disclosure (Amazon)

  • Manufacturer: Pulsar Gaming Gears
  • Seller: Amazon.co.jp
  • Fulfilled by: Amazon.co.jp
  • ASIN: B0C3G9QNBC
  • Note: This article covers a manufacturer-made product based on Amazon listing details.

Best Use Cases

The clearest fit is someone already using a Pulsar Xlite Series Mini who feels the mouse getting slippery late in a session. In FPS and battle royale play, where you alternate between flicks and micro-adjustments, finger slip translates directly into aim inconsistency.

Removing that variable for around ¥980 (as captured May 2026) is efficient.

Second: people with sweaty hands — and, equally, people with dry fingertips that can't purchase on smooth plastic. Slip comes from both directions, and added friction helps either way.

Third: people who like the mouse's weight and shape but not its surface finish. At 0.5mm you can swap the texture without altering how the shell feels in the hand — a sensible fix for a complaint that doesn't justify replacing the mouse.

Before You Buy

Confirm your mouse is an Xlite Series Mini first. This is almost certainly the top cause of returns on pre-cut tape.

A shape that doesn't match has no use. The classic failure is assuming "it's an Xlite, so it'll fit."

It won't make the grip thicker. 0.5mm adds friction, not volume.

If the Mini feels too small for your hand, this doesn't solve that — the shell size does, and that means a different mouse.

Texture is a matter of taste. Grip tape works through a slightly abrasive surface.

Some people find that uncomfortable over hours of contact. You can't know until you try it, but the low price makes trying it a cheap experiment.

Repositioning has limits. Peeling and re-placing a piece repeatedly kills its tack and shortens its service life.

Getting it right the first time is what makes it last. If you're unsure about placement, expose only part of the backing, dry-fit the position, then peel the rest.

Watch the listing metadata too. In the pricing data behind this article, one source was labelled "Amazon US" while the link and currency were Amazon.co.jp and Japanese yen.

Mismatches like this happen on shopping pages as well. When you open the product page, judge the item by the product images, the title, and the stated compatible model rather than by labels or auto-generated blurbs.

Accessory listings in particular often bundle several models or sizes as variations, and the pre-selected option may not be the one you want. Re-reading the variation selector right before adding to cart prevents most of these mistakes.

Alternatives Compared

There are three broad options. First, model-specific pre-cut tape like this one: high finish quality with no craft skill required, but locked to one mouse.

Second, generic sheets you cut yourself: works on anything, though cutting symmetrical pieces by hand is harder than it looks. Third, thick grip or side tape, chosen when you want to change grip diameter rather than just friction.

This product sits firmly in the first category, and it only clearly beats the other two when you own the supported mouse and don't want to do any cutting. If you rotate between several mice or expect to switch mice soon, a generic sheet wastes less money in the long run.

FAQ

Q. Can I use it on a mouse other than the Xlite Series Mini? A.

Not as intended. The cut outlines follow the Mini's shell, so on other models the edges lift or the coverage falls short.

Use a generic sheet instead.

Q. Will removal damage the mouse? A.

It's designed to leave minimal residue, but residue is more likely after long use or heat exposure. Peel slowly at a shallow angle and wipe any leftover adhesive with a cloth lightly dampened with anhydrous alcohol.

Avoid soaking painted surfaces in solvent.

Q. How often does it need replacing? A.

It varies too much with hours of use and hand condition to state a figure. When the texture smooths out and slip returns, it's time.

Many users treat it as a consumable and buy several at once.

Q. Does it change the mouse's weight? A.

At 0.5mm the added mass is normally negligible within the tuning range of a lightweight mouse.

The exact figure isn't published, so weigh it yourself if you track grams.

Q. How should I read the 4.3 / 64 reviews figure? A.

That's 86% positive as captured on 26 May 2026 — good for an accessory. But 64 reviews is a small sample, so read the negative ones (adhesion?

sizing? texture?) rather than trusting the average alone.