Overview

TALONGAMES Mouse Feet are aftermarket replacement glide skates cut specifically for the Pulsar X2 and X2 Mini. The material is pure PTFE blended with the company's own glide-enhancing compound, and the edges are rounded.

Each package contains two full sets, pre-cut, so you can swap them the day they arrive. The honest framing is this: it is a consumable that resets your glide feel without buying a new mouse, not an upgrade that changes what the mouse can do.

Stock feet round off at the corners as they wear. Movement gets looser while stopping gets vaguer.

If you have been on the same mouse for months, replacing the feet is the cheapest way to rewind that. If your mouse is nearly new, the difference will be small and the money is better spent elsewhere.

Compatibility Guide

Compatibility is limited to the Pulsar X2 and X2 Mini, exactly as the product's compatibility note states. Do not assume that shape-adjacent Pulsar variants or other brands will work.

Feet look interchangeable when the outline is close, but a two-millimetre difference in the sensor cutout or screw-hole placement can affect tracking. Check the model printed on the underside of your own mouse before ordering.

The most common installation failure is leaving part of the stock feet behind. As the product instructions state, you must peel the originals off until the screw holes are visible.

Some mice use two-layer feet, and if the thin base layer stays glued to the shell, the new skate sits higher than intended. Mouse feet live in a sub-millimetre world, so even 0.2mm of leftover base can shift lift-off distance and tracking stability.

Clean the adhesive residue with alcohol and let it dry fully before applying the new set.

Surface pairing matters too. The rounded edges keep the skate from digging into cloth weave, which smooths the initial break-away.

On glass or hard plastic pads, friction is already low, so the change from stock may be harder to notice. Cloth-pad users get the most out of this product.

Product Info

The specification list is short: two sets per package, PTFE plus a glide-enhancing material, compatibility with the Pulsar X2 and X2 Mini, and rounded edge treatment. The two-set count matters more than it sounds — your spare pair is already in the box when the first set wears out.

The price was ￥1,280 on Amazon.co.jp as captured on 19 August 2026, and an earlier capture of the same ASIN showed the same ￥1,280.

Because that covers two sets, the effective cost is roughly ￥640 per set. Prices move, so check the product page for the current figure before buying.

The eBay data available here shows only "See listing" with no concrete amount; for a small consumable like this, domestic stock usually wins on shipping cost and lead time anyway.

Reviews stand at 5 ratings averaging 5.0 (100% positive, captured July 2026).

A perfect score sounds decisive, but five reviews is a very small sample. It tells you no major complaint has surfaced yet; it tells you almost nothing about long-term adhesive durability or unit-to-unit variance.

Treat it as an absence of red flags, not as proof of quality. No warranty is stated, which is normal for a consumable.

When to Replace, and How

Judge replacement by symptom, not by mileage. Swap them when you notice grittiness or catching on the pad, when the corners have rounded enough that the mouse no longer stops where you want it, when the white PTFE layer has thinned enough to show the backing, or when one side has worn unevenly and the mouse sits slightly tilted.

The procedure: peel the stock feet slowly from one edge, visually confirm no base layer remains near the screw holes, wipe off adhesive residue with alcohol, let it dry completely, then align once and press from the centre outward. Get the placement right the first time — repeated repositioning weakens the adhesive.

Keep tools away from the sensor window while peeling.

Best Use Cases

  • Long-term Pulsar X2 / X2 Mini owners — the clearest win. For ￥1,280 as of August 2026 you restore consistent glide after months of uneven wear, which matters most in FPS play where micro-adjustments need to repeat identically.
  • Cloth pad users — the rounded edges reduce the catch on fabric weave, so break-away feels cleaner.
  • People who want a spare on hand — two sets means no reorder scramble later, and feet are the kind of part that quietly goes out of stock.
  • Long desk sessions — lighter break-away reduces wrist effort somewhat. Set expectations realistically: this restores a worn part, it does not redesign your ergonomics.

Before You Buy

This is not a mouse upgrade. The sensor, switches, weight and shape are untouched.

If your aim is inconsistent because of sensor settings or a worn pad, new feet will not fix it. Anyone shopping for a replacement mouse should not treat these as a substitute.

Compatibility is narrower than it looks. X2 and X2 Mini only. "It says Pulsar" is not enough — match your exact model.

Bad installation directly degrades performance. Leftover base layer raises sensor height and destabilises tracking.

Most "my new feet track worse" reports trace back to incomplete removal, not the product. Peel until the screw holes show; do not skip that step.

Glide preference is subjective. A PTFE-plus-enhancer blend generally trends faster than stock.

If you deliberately run slower feet for stopping control, these may feel too loose. Faster is not automatically better.

Watch for listing inconsistencies. In this product's data, one price entry is labelled "Amazon US" while pointing at the Japanese listing with a yen price.

That kind of metadata drift is common on marketplace pages. When you open the listing, do not trust labels or category text alone — confirm from the product image and title that it is the Pulsar X2 / X2 Mini feet set before ordering.

Do not over-read the 5.0 score. It represents five buyers.

Adhesive longevity in hot weather and even wear over months are simply not covered by a sample that size.

FAQ

Q. Will they fit an X2H or another brand? A.

Stated compatibility is X2 and X2 Mini only. Even a close outline can misalign the sensor cutout, so cross-fitting is not recommended.

Q. How long do they last? A.

It varies too much by pad surface and usage to give a number. Replace by symptom — when corners round off and stopping gets vague.

With two sets included, you can time the second set by how the first wears.

Q. Do they cover the sensor ring? A.

The listed specs cover only quantity, material, compatible models and edge treatment. Check the product page for any additional sensor-ring piece.

Q. What tools do I need? A.

A thin plastic pry tool, alcohol for adhesive residue, and a cloth. Avoid metal tools, which scratch the shell.

Q. Are they worth it on a hard pad? A.

There is still an effect, but it is smaller than on cloth, because friction is already low on hard surfaces.

Q. Can I reposition them?
A. Physically yes, but adhesion drops. Line them up before contact and commit in one go.

Product Disclosure (Amazon)

  • Manufacturer: TALONGAMES
  • Seller: TALONGAMES Direct
  • Fulfilled by: TALONGAMES Direct
  • ASIN: B0C48G227F
  • Note: This article covers a manufacturer-made product based on Amazon listing details.