![[ 強化ガラス素材 ] TALONGAMES マウスソールマウスフィート Logicool G502 X PLUS LIGHTSPEED ワイヤレス無線 RGB](/_next/image?url=https%3A%2F%2Fm.media-amazon.com%2Fimages%2FI%2F51r7Esela4L._AC_SL1500_.jpg&w=1920&q=75)
This article covers the TALONGAMES tempered glass mouse feet for the Logitech G502 X PLUS LIGHTSPEED, walking through compatibility, installation, feel, and who should skip them.
Overview
The TALONGAMES tempered glass mouse feet are replacement glides made specifically for the Logitech G502 X series: the G502 X PLUS LIGHTSPEED, G502 X LIGHTSPEED, and G502 X wired. They are cut from aluminosilicate glass instead of the usual PTFE, which means lower friction and far better abrasion resistance.
The mouse itself is not included — this is a part you buy to replace the stock glides.
The goal is simple: reduce both static and dynamic friction so flicks and long tracking movements feel lighter in FPS titles. Fully polished round edges keep the corners from digging into soft cloth pads, which is where cheap flat-cut glides usually snag.
On Amazon.co.jp the product carries 98 reviews at 4.5 out of 5 stars (90% positive) as of May 2026 — a solid sample size for a niche replacement part.
The short verdict: this is for G502 X owners whose stock feet have worn down, or who want a noticeably faster glide. If you value quiet operation or need your cursor to stop exactly where you release it, read the cautions below first.
Glass vs. PTFE Glides
Replacement feet generally come in PTFE, UHMWPE, glass, or ceramic. This product is in the glass camp.
| Material | Initial glide | Sustained glide | Durability | Noise |
|---|---|---|---|---|
| PTFE (most stock feet) | Slightly heavy | Moderate | Medium (months to a year) | Quiet |
| Tempered glass (this product) | Light | Very light | High | Noticeably louder |
Treat the durability column as a material-property trend, not a published lifespan — the manufacturer does not quote hours of use. The practical benefit is that glass does not thin out the way PTFE does, so you replace it far less often.
That speed cuts both ways. Glass feet make stopping harder, and low-sensitivity players who micro-adjust will feel it immediately.
Budget several days to a week of adjustment.
Compatibility Guide
The cutouts match the G502 X underside, so the supported list is narrow.
Compatible
- G502 X PLUS LIGHTSPEED (wireless RGB)
- G502 X LIGHTSPEED (wireless)
- G502 X (wired)
Not compatible
- G502 (original, wired)
- G502 RGB (wired)
- G502 HERO (wired)
- G502 LIGHTSPEED (older wireless model)
This is the single biggest pitfall. Logitech has shipped many mice named G502, and the older HERO generation has a different foot shape and sensor window position from the X generation.
Check for the X in the model name — the label on the underside of your mouse is the reliable place to look. Feet fitted to a non-X G502 will not line up and may partially block the sensor.
Pad compatibility matters too. On hard pads (plastic, glass, resin-coated) the glide becomes extremely fast; on cloth pads the round-edge finish keeps the corners from catching.
The trade-off on rough control-style cloth pads is that glass does not wear, so the pad surface wears instead. If you are attached to a particular pad, factor that in.
These feet touch nothing internal, so LIGHTSPEED connectivity, wireless performance, and battery life are unaffected. The package includes the sensor ring, so no additional parts are needed.
Product Info
| Item | Detail |
|---|---|
| Material | Aluminosilicate (tempered) glass |
| Compatible models | G502 X PLUS LIGHTSPEED / G502 X LIGHTSPEED / G502 X wired |
| Edge finish | Fully polished round edges |
| Package contents | One set of feet (main body + sensor ring) |
It is sold through the TALONGAMES official store and fulfilled by Amazon, priced at ￥2,380 including tax as of May 2026. Prices move with stock and sales, so confirm the current figure on the product page before ordering.
That figure sits squarely in the normal range for glass replacement glides, with nothing suggesting a data-collection error.
As of May 2026 the listing shows 98 reviews at 4.5 stars (90% positive).
Per set it costs more than a plain PTFE replacement, but because you re-apply far less often, the long-run cost can favor glass. Again, the mouse is not included — buying this without a G502 X gets you nothing usable.
Installation and How Not to Ruin It
The job takes about ten minutes, and exactly one step decides whether it goes well.
Power off the mouse; unplug the dongle on wireless models.
Peel the stock feet slowly from one edge, using tweezers or a toothpick so you do not gouge the shell.
Remove them completely, until the screw holes are visible. Stock feet are sometimes two-layer; leaving the lower layer in place raises total height, shifts lift-off distance, and makes tracking erratic.
Wipe off leftover adhesive with isopropyl or similar, then let it dry fully.
Align, press down firmly for a few seconds, and seat the sensor ring without covering the sensor window.
Repeated repositioning kills the adhesive, so dry-fit the alignment before exposing the sticky side. Keep the old stock feet rather than throwing them away — they are your fallback if the glass does not suit you.
Best Use Cases
- FPS and battle royale players where aim decides matches. Low friction makes fast flicks and long tracking arcs lighter, and it pairs especially well with mid-to-high sensitivity.
- G502 X owners with worn stock feet. Glass resists abrasion, so replacement intervals stretch out considerably.
- Cloth-pad users bothered by snagging. The round-edge finish keeps corners from biting into the weave, giving a cleaner initial glide.
- Anyone who wants to keep the G502 X's substantial weight but shed the heavy start-up feel. Changing the feel of a mouse without buying a new one is the real value here.
Cautions Before Buying
1. Buying for the wrong generation is the most common mistake. These will not fit a G502 HERO or the older G502 LIGHTSPEED.
Do not stop reading at "G502" — verify the X.
2. It will get louder. Glass on a pad produces a harder, higher-pitched sound than PTFE.
In a shared home late at night, or on an open microphone while streaming, that scratchy sound can bother you more than you expect. If quiet matters most, stay on PTFE.
3. Stopping power is the price. Faster gliding means harder stopping.
Low-sensitivity players who crawl the mouse across the pad for fine adjustment may find their accuracy gets worse, not better. Either adapt over time or pair the feet with a grippier control cloth pad.
4. Glass breaks. It shrugs off abrasion but handles impact worse than PTFE — a drop off the desk or a piece of grit caught underneath can chip it, or carve a deep scratch into your pad.
Clean the pad regularly.
5. Adhesive residue really does affect the sensor. A few dozen microns of extra height changes lift-off behavior.
Most "the cursor randomly jumps" reports are installation errors, not defective units — suspect your own application first.
6. Do not take the listing metadata at face value. Amazon product pages sometimes carry manufacturer, model, or compatibility fields that do not match the actual item.
In this listing the seller and manufacturer both read TALONGAMES and are consistent, though minor details such as the regional price label can look off. Confirm from the product photos and title that the set you are ordering is the G502 X version.
7. This is effectively one-way. Stock feet lose adhesion once removed, so if the glass does not suit you, the exit path is buying another set of replacement feet.
Decide on that basis.
FAQ
Q. Will these fit a G502 HERO? A.
No. They fit only the G502 X series (X PLUS LIGHTSPEED / X LIGHTSPEED / X wired).
Older G502 models have a different underside layout.
Q. How much faster are they than stock? A.
No friction coefficient is published, so no exact figure can be given, but glass is generally clearly faster than PTFE, and the difference is most obvious at the moment the mouse starts moving.
Q. How long do they last? A.
The manufacturer does not publish a lifespan. Since glass does not thin out with wear the way PTFE does, expect a substantially longer replacement interval under normal use.
Q. Will they damage my mouse pad? A.
Hard pads are largely unaffected; rough cloth pads may wear on their side instead. The polished round edges reduce localized pressure, but the effect on pad life is not zero.
Q. Is the mouse included?
A. No. The package contains one set of feet only (main body plus sensor ring).
Q. Do I have to disassemble the mouse? A.
No screws need to come out — you only swap the glides on the underside. You do, however, need to peel the stock feet off completely until the screw holes are visible.
Product Disclosure (Amazon)
- Manufacturer: TALONGAMES
- Seller: TALONGAMES 公式ショップ
- Fulfilled by: Amazon
- ASIN: B0CF5F4ZLY
- Note: This article covers a manufacturer-made product based on Amazon listing details.
