This article covers KONYEAD 3006 PCIe 4.0 x8 to 4ポート NVMe M.2 2280 SSD 拡張カード ハーフハイトアダプター アルミヒートシンク付き デュアルターボファン 温度制御 最大32TB (4x8TB) 薄型ブラケット付属.

Overview

The KONYEAD 3006 is a PCIe 4.0 x8 to quad NVMe M.2 2280 SSD expansion card that lets you add up to four independent NVMe drives to a single slot. With support for SSDs up to 8TB each, total capacity can reach 32TB. Its half-height (low-profile) design makes it an excellent fit for compact workstations, SFF builds, and rack-mount servers where space is at a premium. Cooling is handled by a sandblasted anodized aluminum alloy enclosure paired with dual turbo fans featuring intelligent temperature control. The fans remain off below 40°C and automatically adjust speed between 40°C and 60°C, balancing noise and thermal performance. Four silicone thermal pads bridge the gap between SSDs and the metal chassis for efficient heat transfer. Positioned as an entry-to-mid-range storage expansion solution, the KONYEAD 3006 targets users who need multiple NVMe drives without sacrificing a full-height slot. It does not support hardware RAID, but works seamlessly with OS-level software RAID (RAID 0/1/10/JBOD) for flexible storage pooling.

Compatibility Guide

Interface: PCIe 4.0 x8 (backward compatible with PCIe 3.0). Requires a physical x8 or larger slot on the motherboard. A x16 slot works fine, but a x4 slot will severely bottleneck performance and is not recommended. Supported SSDs: NVMe M.2 2280 form factor only. SATA M.2 SSDs are not compatible. Each slot provides dedicated PCIe 4.0 x4 bandwidth and supports SSDs up to 8TB. Form Factor: Half-height (low-profile) design. Dimensions are 176 x 82 x 25 mm and weight is approximately 253g. A full-height bracket is included for standard ATX cases. Power Requirements: The card itself draws minimal power, but four NVMe SSDs under full load can consume up to 10W each. Ensure your PSU has sufficient headroom for the total system load. * OS Support: Officially supports Windows. Linux and other OSes may work but require user testing.

Product Info

Released around 2024, the KONYEAD 3006 is priced at approximately ¥71,618 on as of August 2026, placing it in the mid-range tier for multi-port NVMe expansion cards. Warranty varies by seller but typically ranges from one to two years. It is built around the IX8024 controller IC, offering reliable and stable performance. The card is plug-and-play with no additional driver installation required.

Best Use Cases

SFF / Small Form Factor Builders: Ideal for users with compact cases that lack multiple M.2 slots. The half-height profile fits most Mini-ITX and 1U/2U chassis, but always check internal clearance before purchasing. Home Server / NAS Enthusiasts: Great for building large storage pools using software RAID (RAID 0/1/10/JBOD) with Windows Storage Spaces or Linux mdadm. Remember that hardware RAID is not supported, so plan your redundancy strategy accordingly. * Video Editors / Creative Professionals: Useful for separating cache drives, scratch disks, and project storage across multiple fast NVMe SSDs. Dedicated PCIe 4.0 x4 lanes per slot ensure consistent sequential performance for demanding workflows.

Things to Consider

No Hardware RAID: The card lacks a hardware RAID controller. If you need hardware RAID, consider a dedicated RAID card or rely on OS-level software RAID. PCIe Lane Consumption: Using a PCIe 4.0 x8 slot may share bandwidth with your GPU or other devices, especially on platforms with limited PCIe lanes (e.g., AMD AM4 B550/X570). Check your motherboard's lane distribution before purchasing. Thermal Environment: While the dual turbo fans are effective, the card still depends on case airflow. In tightly packed or poorly ventilated cases, ensure adequate exhaust to prevent thermal throttling. Overkill for Basic Users: If you only need one or two extra M.2 slots, a simpler PCIe x4 adapter card may be more cost-effective and easier to fit. ## FAQ
Q: Can I use this card on a PCIe 3.0 motherboard? A: Yes, it is backward compatible with PCIe 3.0. However, bandwidth will be limited to PCIe 3.0 x8 equivalent, which may cause performance drops when all four SSDs are under heavy load simultaneously. Using two SSDs should be fine for most real-world scenarios. Q: Does it support hardware RAID? A: No, hardware RAID is not supported. The card works with OS-level software RAID such as Windows Storage Spaces or Linux mdadm. You can configure RAID 0, 1, 10, or JBOD through the operating system. Q: Can I install M.2 SATA SSDs in this card? A: No, the card only supports NVMe M.2 SSDs. SATA M.2 drives will not be recognized despite having the same physical connector. Always use NVMe drives with this expansion card.

Product Disclosure (Amazon)

  • Manufacturer: KONYEAD
  • Seller: Amazon US
  • Fulfilled by: Amazon US
  • ASIN: B0H7WJ12RC
  • Note: This article covers a manufacturer-made product based on Amazon listing details.